Precision Tillage Accessories

Poor residue management is costly, and problems like poor emergence due to hairpinned residue in your strips is avoidable with the all New Trailblazer-STC floating row cleaners for your strip till machine.

The Trailblazer-STC automatically adjusts to contours and conditions in your fields, eliminating the need to adjust field to field, keeping you in the cab and covering acres.

Options for either 16″ concave notched discs, or 13″ toothed Blades allow you to fit the Trailblazer-STC to your operation. Both are mounted on dual sealed bearings that require zero daily maintenance or greasing.

Once you pull the pin and remove your old row cleaners, you are less than 15 minutes away from having the Trailblazer-STC installed. The intelligent design uses common pivot points and the fit-up is as good as factory.

If its hard to adjust, you aren’t going to do it as often as you should. Many strip till machines on the market today have time consuming, cumbersome, knuckle-busting spring adjustments. The Optimizer Basket puts seedbed control at your fingertips so you can optimize your seedbed no matter the conditions.

Easily adapt to varying soil types and conditions quickly with in-cab adjustable pneumatic down pressure. The Optimizer Basket puts on-the-go control in your hands… without a wrench & from the cab.

The Optimizer Baskets 16″ diameter cleated baskets are engineered with an open center design to reduce plugging in wet conditions and to keep you stripping.

Sandy soils and dry conditions can be tricky to manage in strip-till. The Rubber Press Wheel option helps to firm the strip and seal in moisture, giving you a great seedbed with increased moisture to help in germination.

Tough & sticky soils create their own set of challenges for most strip-till baskets on the market, causing them to plug or leaving behind a rumble strip with their horizontal basket bars. The Steel Wheel option gives a better mulch effect with many points of contact, and easily sheds mud, while still firming the soil.

Most of the time, covering more acres means traveling further distances to fields and larger changes in topography or soil types. With the Optimizer, you can quickly and easily pull the pin and slide in a new attachment to meet these changes in a matter of minutes. Eliminate the limitations of your current machine and quickly adapt to create the best seedbed possible.

Poor residue management is costly. Problems like poor emergence due to residue and rootballs being smashed into the strip by depth band coulters are all avoidable with the  **NEW** Trailblazer™-STO floating row cleaners for your strip till machine.

The Trailblazer™-STO automatically adjusts to contours and conditions in your fields, eliminating the need to adjust field to field, keeping you in the cab and covering acres.

Once you pull the pin and remove your old row cleaners, you are less than 15 minutes away from having the Trailblazer™-STO installed. The intelligent design uses common pivot points and the fit-up is as good, if not better, than factory.

The Trailblazer™-STO is built to handle the roughest conditions you can push it into. The Finger tooth residue managers and depth wheels are mounted on dual sealed bearings that require zero daily maintenance or greasing.

With the simple, wrench-free depth adjustment handle, you can quickly set your float limit setting. This makes it quick and simple to make depth adjustments as your operating conditions change. Better yet, you don’t have to struggle with corroded set screws, wrenches, and a tape measure anymore.

We think you know what’s best when it comes to setting up your perfect berm, and factory non-angle adjustable blades just don’t cut it. The wrench-free, easy-to-adjust, 18″ FlexBerm™ blades are angle adjustable from 2° – 18° and allow you to choose what’s best for your berm building.

The blade support arms on the FlexBerm™ are mounted on the outside of the coulters, creating a wide-open area for soil mixing and blending between your coulters without large obstructions blocking the soil flow through your units.

Driving out worn roll pins to replace points and adjust fertilizer depth are hard enough without a big sharp coulter in the way. With the simple lock-up position on the depth adjustment handle, lock the blade up and out of your way while hammering away at those roll pins.

The FlexBerm™ is built to handle the roughest conditions you can put it in. The 18″ wavy coulters are mounted on heavy-duty hubs with two sealed bearings, and the arms pivot on greaseless bushings requiring zero daily maintenance or greasing.

Once you break your old wavy coulters loose, you are less than 15 minutes away from having the FlexBerm™ installed. The intelligent design uses common mounting points and the fit-up is as good, if not better than factory.